BeoVision 4 Guide
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No User-serviceable parts inside. Refer servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not expose this equip ment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment.
Set up BeoVision 4 This Guide contains all the relevant information about the connection, setting-up and use of your plasma screen with a Bang & Olufsen BeoSystem. If you wish to mount the screen in a wall bracket, please refer to the Guide enclosed with the bracket. This chapter describes how to set up the screen in a BeoSystem setup. Cautions – The screen is developed for indoor use in dry, domestic environments only, and for use within a temperature range of 10–40°C (50–105°F).
>> Set up BeoVision 4 Cable connections DVI-D SLOT 1 IR SLOT 2 Make the connections while both the screen and your BeoSystem are disconnected from the mains. IR (SLOT 3) IR IN (9-pin) DVI (SLOT 2) DISPLAY 1 MONITOR SERIAL BEOSYSTEM 3 IR receiver: The screen has a built-in IR receiver. It is therefore not necessary to mount a separat IR receiver, as it is described in the BeoSystem Reference book.
Auto Colour Management The Auto Colour Management auto matically compensates for colour changes on the screen every 120 hours of use. Thereby it ensures perfect colours on the screen continuously. It is also possible to activate the feature manually through the BeoSystem TV Setup menu. Do not switch off your system or disconnect it from the mains during the calibration.
Maintenance Normal maintenance, such as cleaning the screen, is the responsibility of the user. To achieve the best results, follow the instructions on this page. Please consult your Bang & Olufsen retailer to determine recommendations for normal maintenance. Cabinet surfaces Wipe dust off the surfaces using a dry, soft cloth.
Waste Electrical and Electronic Equipment (WEEE) – Environmental protection The European Parliament and the Council of the When disposing of electrical and electronic equip European Union have issued the Waste Electrical ment by use of the collection systems available in and Electronic Equipment Directive. The purpose of your country, you protect the environment, human health and contribute to the prudent and rational the Directive is the prevention of waste of electrical use of natural resources.
www.bang-olufsen.