User Guide User Manual

> Teletext
30
Making video recordings via Teletext
The Video Programming via Teletext
function (VPT) in the video tape
recorder allows you to program a
recording via the Teletext page(s)
which lists TV programmes.
When you are on the Teletext page
listing TV programmes, you can start
programming a recording. Now choose
the programme you want to record.
When you have chosen a programme,
its start time, title and stop time are
highlighted.
When you accept the stop time and as
such accept the programme for
recording, the data from your
recording entry appears over the
Teletext page. Before you store it,
make sure that the information
displayed is correct. You can add to
start or stop times if you wish*.
When you store your recording entry,
the start and stop times of your
recording appear on the status line
together with the indication RECORD.
If you wish you can carry on and make
more recording entries or you can press
a source button or EXIT to leave
Teletext.
*Note: The method of programming described on
this page is valid when PDC/VPS is set to Off or
when PDC/VPS broadcasting signals are not broad-
cast. Off is the default setting for your BeoVision
Avant.
A Teletext page with the Timer recording facility
activated – PDC/VPS signals are not available.
A status line on top of the page indicates your
recording
Note: You can call up the Timer Index menu for
Timer recordings while you are still on the
Teletext page to check the recording entries you
have made. Press MENU to call up the Timer
index.
Press to switch to Teletext
Call up the Teletext page listing TV
programmes, then...
Press to be able to program a
recording
Press to move the cursor to the
programme you wish to record
Press to accept the start time
Make sure the correct stop time is
highlighted...
Press to accept the stop time for
your recording
Press GO to store the recording
Press to leave Teletext
A cursor appears highlighting the start time of the
first programme on the page…
Alternatively, press
tt or ss to move the cursor
The cursor disappears and a status line appears
over the Teletext page, e.g.
18:55 – 19:40 30.JAN P13 BBCWORLD OK?
If the data is not correct, use
ss or tt to move
the cursor and
▲ or ▼ to reveal the correct data…
GO
then
TEXT
RECORD
or
GO
The status line now indicates your programmed
recording, e.g.
18:55 – 19:40 RECORD
The cursor is placed on the stop time of the
programme you just selected for recording
To program more recordings, continue to select
programmes…
GO
then
or
EXIT