Installation guide

Setup - Date & Time Settings
Date & time settings
A correct time setting is important as it is used for the monitoring of events, astronomic clock events and for
time stamping the error log, for instance to show the exact time a fault has occurred.
The system will still work even if the time setting is not correct.
The date and time settings can be synchronized with Internet time servers (recommended) if BeoLink
Gateway has access to the Internet or they can be set manually.
Date
Settings for Year, Month and Day.
Time
Settings for time
Synchronize from Internet
Possible to enable/disable the connection with Internet time servers.
Time Zone
Setting for the time zone.
Location settings (Astronomic Clock)
The Locations Settings are used by the BeoLink Gateway to calculate, e.g. sunrise and sunset.
Latitude and longitude are the settings for the astronomic clock. The settings is in decimal degrees and the
positive values are for North and East and negative values are for South and West.
20