Installation guide

Sources
For each product sources available to the user can be added. For Network Link products it can be queried
directly from the product by pressing the Synchronize sources with product button.
The information to provide for each source is the following:
- Source:
Actual IR command for selecting the source.
- Name:
Optional label to show with the source. Max. 5 to 6 characters. It is recommended to leave this field
empty unless a specific description for this source is required.
-Dst:
Equivalent to the A/V button on Beo4, or the Destination field for BeoLink commands in macros. AUTO
can be selected to retrieve the default setting for the source type. The setting can be modified if
needed.
-Link:
If a link product has local sources, sources from the Audio/Video masters are selected using the LINK
Modifier. Also necessary for products in OPTION 4. Some BeoLink products do not support the
modifier.
-UI type:
Indication to a the mobile application of the type of user interface is needed for operating the product.
The type that suits the specific source best should be chosen.
- Favourites list:
This makes it possible to select a favourite list defined in the Favourites section.
HDMI matrix support
BeoLink Gateway supports unconventional source selection commands where source selection is a
sequence of more than one command.
HDMI matrix sources 00 to 19 can be selected on the source drop-down menu. The commands sequence will
be visible on the mobile application.
Note! The mobile applications do not support source selection sequences.
Network cameras setup
In this section the configuration for several network cameras can be added. The optional user name and
password are used for basic HTTP authentication to the camera.
A base URL to which all commands will be appended must be provided, e.g. http://192.168.1.37/axis-cgi/.
Then commands for obtaining video and images both in high and low resolution must be provided, e.g.
mjpg/video.cgi for high resolution video. All the commands will be appended to the base URL.
Optional commands can be provided for cameras with pan/tilt/zoom control.
Note! Some browsers will not be able to work with HTTP authentication.
Raw edit option
By pressing the Raw edit button a text representation of all the fields appears. It is possible to copy/paste, edit
in the favourite text editor.
It is possible to copy and paste the text when setting up other similar cameras.
Zone Setup
- Zone resource filtering
Zone resource filtering makes it is possible to check and re-order the available resources, which will be
shown to the user. Not used resources can be hidden.
- Options / Hints
For macro and buttons, which are visible on the user interfaces the following options are available:
- Compact
When ‘Compact’ is enabled a half-width button will be produced. Two half-width buttons will appear
next to each other.
- On camera
With ‘On camera’ enabled the half-width button will shown next to the IP camera images in that zone.
- Confirm
‘Confirm’ can be enabled for buttons, which need confirmation from the user before the desired
function is executed.
Favourites
This menu is for the definition of favourite lists for TV channels and radio stations. Favourite lists can be
allocated to one or more sources. The mobile application shows channel/station logos, based on the
selected favourite list. The favourite lists are identified by name. This name will be visible in the sources