Installation guide

Configuration - Save Revision
Save Revision
Saving a revision means saving the current configuration. The revision can be named, which is useful if
changes have been made to the configuration. The saved revision is available in the Revision History list and can
be restored.
Versioning and backup
Every time changes are made - in any of the configuration menus - during the setup of the system changes
takes effect immediately - this is the ‘current configuration’.
Auto saving at least every 20th minute if there is a low or no programming activity. If the programming activity is
higher auto saving will be performed with shorter intervals, depending on the activity.
Up to ten revisions of the configuration can be saved. It is possible to recall a previous revision, to download
a configuration to a connected computer for backup purposes and to upload a configuration to BeoLink Gateway.
These functions are available in the ’Configuration’ menu in the menu bar.
38