Installation guide

Configuration - Revision History
Revision history
BeoLink Gateway keeps a record of the latest ten configuration releases. A new release can be saved by
selecting ’Configuration’ -> ‘Save revision’.
Every time a configuration is saved the system prompts for a short description of the revision.
The current configuration is copied to the top of the revision history.
If the revision history contains ten revisions, the oldest revision is discarded to leave space for the latest
revision. If an auto-save version is present it will be discarded.
When ‘SAVE’ has been pressed the current configuration will be copied into a new revision and the
auto-save configuration will be discarded.
It is not necessary to save a revision for every change which is made. Auto-save will take care of small
changes.
Auto-save configuration
When changes are made, BeoLink Gateway will automatically save a revision called ’auto-save configuration’.
Auto-save will takes place when changes have been made and nothing happens for one minute and during
the configuration and there are unsaved changes for more than 15 minutes. This means that BeoLink Gateway
ensures that the recent changes periodically are saved into the ‘auto-save configuration’.
Saving a new revision will remove the auto-save configuration, because the saved revision is up to date with
the current configuration.
If BeoLink Gateway is restarted the configuration will be recovered from the auto-save configuration if it is
available.
If an auto-save configuration is not available the configuration will be recovered from the latest revision.
Recalling a saved revision
To access any of the ten saved revisions or the auto-save configuration select ‘Configuration’ --> ‘Revision
History’ and choose one of the revisions.
The selected revision will be copied into the current configuration. It will become active immediately and it
will be saved as a new auto-save configuration.
41