Installation guide

Socket panel
Mains
For the connection to the mains.
Network Link (Ethernet)
For the connection to a Network Link router to have communication via Ethernet with a IP-based Home
Automation system and the Network Link.
USB
The USB sockets are for the connection of Home Automation systems with RS232 and RS 485
communication. This requires an USB ↔ RS232 converter.
The USB ↔ RS232 converter for the B&O ServiceTool can be used.
Master Link
The Master Link socket and the RJ45 socket are used to connect products connected in a Master Link system.
This makes it possible to control a compatible audio and video system and to distribute sound throughout the
house.
The connections in the RJ45 socket and the Master Link socket are identical.
- RJ 45 socket
The RJ45 socket is for Master Link cable equipped with a RJ45 socket.
- Master Link socket
The Master Link socket is for Master Link cable equipped with a Master Link plug.
Setup Button
The setup button can be used during normal operation by pressing and holding the button.
LED Indicator
The LED Indicator gives feedback about the status of the system and about functions selected with the
‘Setup button’.
5