Owner's manual
20
CLEANING AND OILING THE BANKS RAM-AIR FILTER
Notification
The Banks Ram-Air Filter comes pre-oiled and no
oiling is necessary for initial installation.
Use Banks ram-Air Filter cleaning system (part
#90094) available from Gale Banks Engineering
to service the Air Filter. Follow the instructions
included with the cleaning system to clean and
re-oil your Banks Ram-Air Filter.
PRE-CLEANING
SPRAY-ON CLEANING
soak for 10 minutes.
PAN CLEANING
minutes.
CLEANING HINTS
NO
NO NO
NO NO
NO NOs
and HARDEN the rubber end caps.
RINSE OFF
dirt and does not drive it into the
DRYING HINTS
OPEN FLAME – DO NOT USE HEAT DRYERS!
COMPRESSED AIR WILL BLOW HOLES IN THE ELEMENT.
AEROSOL OILING
Wait 10 minutes and
OILING HINTS
NEVER USE Automatic
REINSTALL
DO NOT DISCARD
PERFORMANCE HINTS
reaches 18”/H
2
O.
CAUTION!
6.
7.
8.
9.
10.
1.
2.
4.
5.
P.N. 96292 V.2.0