User Manual

If not installing the optional Banks
Tailpipe Tip, skip to step 25.
18. Insert the optional tailpipe tip
over the tailpipe outlet. Adjust the tip
past the edge of the body or where
aesthetically pleasing. Torque the band
clamp to 35 ft-lb.
19. Remove the protective covering
from the tailpipe tip.
Caution: the protective covering
may ignite and burn if not removed
prior to running the engine.
20. Your system includes two (2)
Banks Power decals designed to
complement the Duramax emblems on
the vehicles front doors.
21. Re-connect the negative battery
cable. Start the engine and listen for
exhaust leaks. Tighten the exhaust
clamps as necessary. Whenever
possible, tack weld slip connections
to prevent disengagement is
recommended. The Banks Monster
Exhaust installation is now complete.
22. Monster exhaust system
installation is now complete.
Figure 4
96568 v.1.0 9