User Manual

ManualsBrandsBanks Power ManualsFor the carDodge Trucks: (Diesel '03 - 07 5.9L Cummins) Speed Control- Banks Brake with CBC-SmartLock '04-07

16 97055 v.8.0

11. Slide the V-clamp that is on the

Brake assembly onto the turbo outlet.

Make sure that the flanges on the

Banks Brake and the turbo’s outlet

are centered in the V-clamp. Loosely

tighten the clamp.

12. Clamp the Brake and exhaust

pipe together with the V-clamp that

was placed over the exhaust.

NOTE: If the exhaust support was

removed, a block of wood on a jack

or a friend may help in lining up the

exhaust pipe to the Banks Brake

easier.

13. Tighten the V-clamps.

14. If the exhaust support was

removed, re-attach it to the

transmission.

15. Reinstall the wheel wells, tires

and lower the truck to the ground.

-END SECTION 2-

Figure 12