User Manual

4 97055 v.8.0
Gale Banks Engineering Inc. (hereafter
“SELLER”), gives Limited Warranty as
to description, quality, merchantability,
fitness for any particular purpose,
productiveness, or any other matter of
SELLER’s product sold herewith. The
SELLER shall be in no way responsible
for the product’s open use and service
and the BUYER hereby waives all rights
except those expressly written herein.
This Warranty shall not be extended
or varied except by written instrument
signed by SELLER and BUYER.
Please see enclosed warranty
information card, or go to
ww.bankspower.com/warranty,
for warranty information regarding your
product. Parts or devises outside the
products kit are not covered under Gale
Banks Engineering warranty. All products
that are in question of Warranty must be
returned shipping prepaid to the SELLER
and must be accompanied by a dated
proof of purchase receipt. All Warranty
claims are subject to approval by Gale
Banks Engineering Inc.
Under no circumstance shall the SELLER
be liable for any labor charged or travel
time incurred in diagnosis for defects,
removal, or reinstallation of this product,
or any other contingent expense.
Under no circumstances will the SELLER
be liable for any damage or expenses
incurred by reason of the use or sale of
any such equipment.
WARNING! The Vacuum Pump
must never be run open to the
atmosphere, as this will damage
the Pump diaphragm. The Pump
must always be connected to the
Vacuum Solenoid or it’s vacuum
nipple must be plugged. The
warranty on the Pump will be
voided if the Pump is allowed to
run open to the atmosphere.
Banks Brake system 55225 for
some 2004 thru 2005 models
and system 55226 for 2006 thru
2007 models will be required
for vehicles equipped with a
transmission throttle valve
assembly. Please Verify that
your vehicle is equipped with
a transmission throttle valve
assembly and that NO Throttle
Position sensor assembly is
installed to have the CBC/
SmartLock function properly. See
Figure 1 & 2.
For some 2004 model vehicles,
if your vehicle is not equipped
with a transmission throttle
valve assembly, but has a throttle
position sensor (TPS) located
in the engine compartment on
the driver side and the three (3)
transmission connectors on the
driver’s side of the transmission
as shown in Figure 2 and 3 you
need system part # 55229 for your
Banks CBC/SmartLock to function
properly.
Limitation of Warranty
In the event that the buyer does
not agree with this agreement:
The buyer may promptly return
this product, in a new and unused
condition, with a dated proof-of-
purchase, to the place-of-purchase
within thirty (30) days from date-
of-purchase for a full refund, less
shipping and/or restocking fee.
The installation of this product
indicates that the buyer has read
and understands this agreement
and accepts its terms and
conditions.