User Manual

ManualsBrandsBanks Power ManualsFor the carDodge Trucks: (Diesel '03 - 07 5.9L Cummins) Speed Control- Banks Brake with CBC-SmartLock '04-07

97055 v.8.0 41

16. Remove the chrome bezel nut

from the Switch shaft. Insert the

Switch shaft into the hole that was

drilled in the dash panel. Re-install the

chrome bezel nut.

17. Reconnect any electrical

connectors and re-install the

instrument panel(s).

18. Plug the Switches’ Connector

into the Banks CBC/SmartLock Wiring

Harness Switch Connector.

19. Route all wiring away from any

pedals or other moving components.

Using the supplied cable ties, secure

the wiring under the dash. Secure all

wiring under the hood away from heat

sources, moving parts, or sharp edges.

20. Re-install the battery ground

cable(s).

-END SECTION 7-

Figure 46 Brake Enable Switch

Figure 47 Overdrive Disable Switch