User guide

97273 v.2.0 11
Banks iQ is shipped from the factory
with a fully rechargeable battery. After
Mounting and Connecting, see Section
3, simply plug the supplied Banks iQ USB
interface cable into the device’s power
connection. See Figure 2. When used
in your vehicle, Banks iQ will operate
on the vehicle’s power source. When
out of the vehicle, Banks iQ can be
charged with the supplied AC-outlet wall
charger. Banks iQ can also be charged
by plugging the supplied USB cable into
a compatible computer connector. Upon
being fully charged, Banks iQ will display
a Blue light.
Press and hold the Power button to
turn Banks iQ on. Within a few minutes,
the Banks iQ will adjust for time, date
and time zone using GPS information. It
even adjusts automatically for daylight
savings time.
NOTE: When Banks iQ is powered off,
date and time information is lost until
the device has been restarted and
locates a GPS signal.
Use the on-screen buttons to access
and use all enabled Banks iQ’s
functions.
Receive Update Notices
Banks iQ is constantly evolving.
We invite you to register at www.
bankspower.com/banksiq to receive
important emails regarding updates
and upgrades for your Banks iQ device.
For more detail instruction to update
your Banks iQ please go to banks
website at www.bankspower.com/
iqupdate
-END, SECTION 2-
Section 2
BANKS IQ START UP
Figure 2 Left Side Edge
Figure 1 Banks iQ