User guide

97273 v.2.0 25
NOTE: The Banks iQ will check for vehicle
diagnostic codes and display either the
code with a brief description or the
message “No codes found”. For a full
description of the code, highlight the
code and the description will appear
below the code list box.
4. To return to the Diagnostics Mode
screen, press the ‘Banks iQ’ icon. Press
the ‘Banks iQ Home’ icon again to return
to the Mode Select menu.
Clearing OBD II DTC(s)
5. After checking for and reviewing any
diagnostic code, touch ‘Clear Codes’ to
erase them from the vehicle’s ECU. If
multiple codes are present, they will all
be cleared.
6. If diagnostic codes reoccur on your
vehicle, you should investigate the
underlying problem to correct it by
calling your vehicle dealer or referring to
your vehicle owner’s manual.
-END, SECTION 8-
DESKTOP
Start and work with any pre- installed
application on your Banks iQ. Press an
application to begin using it. See Figure
21.
Expand your Banks iQ system memory
by installing a micro-SD card in the card
slot (sold separately).
Open and read your Microsoft® Office
documents. Work with the on-screen
keyboard and calculator, watch videos,
view pictures, listen to your favorite
music, and much more.
NOTE: The Windows CE operating
system comes standard in your Banks
iQ and enables you to perform the
productivity functions listed here. In
addition, it enables Banks iQ to “talk” to
and share information with other Banks
products.
PRODUCTIVITY TOOLS
Banks iQ is like having a micro-computer
with you whenever you drive. With its
rechargeable on-board battery, you can
take Banks iQ everywhere you go, inside
or outside your vehicle.
From the Mode SELECT menu, press on
the ‘Productivity’ button.
Scroll to and/or press any button on the
Productivity Screen to start and use the
applications listed below.
Desktop
Access and work with applications using
the Windows CE desktop screen.
Changing Desktop Background
Banks iQ comes with four pre-
programmed desktop background
themes. To access and change the
background displayed on your Desktop,
follow these steps.
1. Touch screen with stylus (supplied)
and hold until menu appears.
2. Select ‘Properties’, then select
‘Display Properties’.
3. Click ‘Browse’.
Section 9
PRODUCTIVITY MODE