User guide

4 97273 v.2.0
Do not use this product until you
have carefully read the following
agreement.
This sets forth the terms and
conditions for the use of this
product. The installation of this
product indicates that the BUYER
has read and understands this
agreement and accepts its terms
and conditions.
DISCLAIMER OF LIABILITY
Gale Banks Engineering Inc., and its
distributors, employees, and dealers
(hereafter “SELLER”) shall in no way be
responsible for the product’s proper use
and service. The BUYER hereby waives
all liability claims.
The BUYER acknowledges that he/
she is not relying on the SELLER’s skill
or judgment to select or furnish goods
suitable for any particular purpose
and that there are no liabilities which
extended beyond the description on
the face hereof and the BUYER hereby
waives all remedies or liabilities,
expressed or implied, arising by law
or otherwise, (including without
any obligations of the SELLER with
respect to fitness, merchantability, and
consequential damages) whether or not
occasioned by the SELLER’s negligence.
The BUYER is responsible to fully
understand the capability and limitations
of his/her vehicle according to
manufacturer specifications and agrees
to hold the SELLER harmless from any
damage resulting from the failure to
adhere to such specifications.
The SELLER disclaims any warranty
and expressly disclaims any liability
for personal injury or damages. The
BUYER acknowledges and agrees
that the disclaimer of any liability for
personal injury is a material term for
this agreement and the BUYER agrees
to indemnify the SELLER and to hold the
SELLER harmless from any claim related
to the item of the equipment purchased.
Under no circumstances will the SELLER
be liable for any damages or expenses
by reason of the use or sale of any such
equipment.
The BUYER is responsible to obey all
applicable federal, state, and local laws,
statutes, and ordinances when operating
his/her vehicle, and the BUYER agrees to
hold SELLER harmless from any violation
thereof.
The SELLER assumes no liability
regarding the improper installation
or misapplication of its products. It is
the BUYER’s responsibility to check
for proper installation and if in doubt,
contact the manufacturer.
The BUYER is solely responsible for all
warranty issues from the automotive
manufacturer.
The use of this device signifies automatic
approval of these conditions.
GALE BANKS ENGINEERING
LIMITED WARRANTY
Please see enclosed warranty
information card, or go to
www.bankspower.com/warranty, for
warranty information regarding your
product. THIS WARRANTY APPLIES
ONLY TO THE ORIGINAL CONSUMER
PURCHASER OF THIS PRODUCT.
In the event of a defect, GBE will, at
its discretion, repair or replace the
hardware product with a product of
like kind or quality, which may be new
or reconditioned, with no charge to the
purchaser for parts or labor. GBE’s limit
of liability under this limited warranty
shall be the actual cash value of the
product at the time the purchaser
returns the product to GBE for repair
less a reasonable amount for usage,
as determined by GBE in its sole
discretion. The repaired or replaced
product will be warranted for 90 days
Disclaimer of Liability & Warranty