Specification

The fan will not start
The fan wobbles.
▪ Check the main and branch circuit fuses or breakers.
▪ Check the line wire connections to the fan and switch wire
connections in the switch housing.
▪ Ensure all motor housing screws are snug.
▪ Ensure the screws that attach the fan blade bracket to the
motor hub are tight.
▪ Ensure the wire nut connetions are not rattling against each
other or the interior wall of the switch housing.
▪ Allow a 24-hour "breaking in" period. Most noises associated
with a new fan disappear curing this time.
▪ If you are using the Ceiling Fan light kit, ensure the screws
securing the glassware are tight.
Check that the light bulbs are also secure.
▪ ▪ Ensure the canopy is a short distance from the ceiling. It
should not touch the ceiling.
▪ Ensure your outlet box is secure and rubber isolator pads
were used between the mounting plate and putlet box.
▪ Check that all blades and bladearm screws are secure.
▪ Most fan wobble problems are caused when blade levels are
unequal.
▪ Check this level by selecting a point on the ceiling above
the tip of the blades.
▪ Measure from a point on the center of each blade to the
point on the ceiling.Measure this distance.▪ Rotate the fan
until the next blade is positioned for measurement.
▪ Repeat for each blade. Any measurement deviation should
be within 1/8 in.
▪ Run the fan for ten minutes. If the fan continues to wobble
please contact Customer Service.