Specification

Installation of the hanging bracket
(suspension part)(page-1)
WOODEN CEIING
Mounting
Bracket
Washers
Self tapping
screw
For wooden ceiling, use wood
screw to drill on the wooden
beam or the "junction box" to fix
the hanging bracket(selection is
made according to actual
requirements of the customers)
SWITCH OFF THE ELECTRICAL MAINS AT THE CIRCUIT BREAKER FUSE BOX.
1) Use the Mounting Bracket (A) as a guide, mark the spots where the 4 Self Tapping
Screws (B) will be drilled.
2) Remove the Mounting Bracket (A), drill 4 holes for 3MM diameter, install the mounting
bracket onto wooden ceillng with the 4Self Tapping Screws (B)&Washers(C)
IMPORTANT : SCREWS MUST BE TIGHTENED TILL SNUG
According to the ceiling of different materials, use different
screws to fix the hanging bracket.Don't fix the hanging
bracket on the wood ceiling less than 12MM to prevent
danger caused by loosening of screws. After the hanging
bracket is completed, ensure that it can withstand the
tension test of more than 68KG for safety.
STEP 1 A-WOODEN CEILING
06
Mounting screws
×4
Expansion bolts
×2