Installation Guide

5 HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Installation (continued)

3 4

Drilling the holes & Making the

waterline connections

NOTE: Do not reverse the hot and cold supply.

□ Mark the locations for the screws with a pencil

(1). With an electric drill (2), drill three 1/4 in.

diameter holes for the screws in the oor.

Place the anchors (G) into the holes.

□ Connect the exible supply lines (3) to the water

supplies (4).

Screwing the mixer to the

standpipe

□ Screw the standpipe (D) onto the mixer (C) by

hand. Turn in a clockwise direction until it is

tight.

Cold inlet

supply line

Hot inlet

supply line

Front

6mm dia.

Floor