User guide

ManualsBrandsBaracoda ManualsAll in One PrinterAll in One Printer

The bluetooth name and Bluetooth registered trademarks are owned by Bluetooth SIG, Inc., and are used by Baracoda under license. The Baracoda names and Baracoda trademarks are

Baracoda, Inc. (US Ofﬁ ce) Baracoda SA (Europe Ofﬁ ce: France)

45 Main street - Suite 616 - Brooklyn, NY 11201 30 Avenue de l’Amiral Lemonnier - 78160 Marly-Le-Roi

Ph: 718 488 9600 - Fx: 718 488 9601 Ph: +33 1 30 08 89 00 - Fx: +33 1 30 08 89 98

User Guide

BaracodaPencil

This document is to be used with BaracodaPencil

BaracodaPencil

Package contents

Check that you have the following items.

Contact your reseller if any item is missing.

•

BaracodaPencil

•

1 Charger

•

1 User’s Guide

Summary of content (6 pages)

PAGE 1
User Guide BaracodaPencil This document is to be used with BaracodaPencil BaracodaPencil Package contents Check that you have the following items. Contact your reseller if any item is missing. © Baracoda™ - September 2004 • 1 BaracodaPencil • 1 Charger • 1 User’s Guide Baracoda, Inc.
PAGE 2
BaracodaPencil User Guide Table of content Introduction.............................................................................................................................. 3 Proper scanning position ........................................................................................................... 3 Quick Start up guide ................................................................................................................. 3 Configuring your scanner ..............................
PAGE 3
BaracodaPencil User Guide 1 Introduction The BaracodaPencil is designed for easy use. You simply press the trigger button to scan a barcode. The colour of the LED (red, green or yellow) shows the status of the device. You can also find a reset button on the back of the Pencil; this button can help you to reset the default parameters if necessary (should you experience further problems, please contact your reseller).
PAGE 4
BaracodaPencil User Guide Other functions • Low Battery • 1 red blink between 2 green of the LED or abnormal operation indicates that the battery level is low. Please immediately recharge the battery. • To recharge the battery, plug the charger into the BaracodaPencil. The LED remains red while the battery is charging. When fully charged the LED will turn off, a full recharge takes about 2 hours. You cannot use the BaracodaPencil during the charging period.
PAGE 5
BaracodaPencil User Guide 4.5 Mode selection “Real Time” mode is the default mode. To switch to “Batch mode”, download the BaracodaManager software from http://www.baracoda.com/download. 5 LED and Beep signals Summary • Slow green blinking – BaracodaPencil is in “Real Time” mode, awaiting a connection • Fast green blinking – BaracodaPencil is connected to a remote device • One 0.5 seconds green flash – barcode scan succeeded • One 0.
PAGE 6
BaracodaPencil User Guide 7 Safety / Regulatory. Standardization CE Norm – European Union EMC Directive FCC – BDA 0010C617DF90 approved Bluetooth™ qualified FCC ID: QSH BP04 CE 0682 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. (in accordance with FCC Part 15.