Operation Manual

Before Using Your Grinder

Prior to using your Encore

grinder for the rst time you should wash the

bean hopper and ground coffee bin in warm soapy water. See the sec-

tion on Care and Cleaning for instruction on how to remove and reinstall

these parts. There may be some rust on the burrs when you receive

your grinder. This is normal and will disappear after a small amount of

coffee has been ground. To remove the rust and season the burrs, grind

1/4 pound of coffee and discard.

Initial Operation

Place the Encore

on a level surface and plug into a correct voltage,

AC outlet only. Remove the lid from the hopper by lifting off. Pour the

desired quantity of roasted whole coffee beans into the hopper up to a

maximum of 8 oz. Replace the lid. Ensure the ground coffee bin is fully

inserted.