Operation Manual

8
|
www.barbecook.com
• Neverplacethedeviceonaammablesurface(e.g.tablecloth,carpet,etc.).
• Alwaysplacethebarbecueinawell-ventilatedarea.Donotblocktheventila-
tionslotsofthedevice.Keepaminimumdistanceof10cm(5”)towallsor
other items.
• Donotplacenexttodevicesorobjects,whichreactsensitivelytomagnetic
elds(e.g.radios,TVs,etc.).
• Donotplacenexttoopenres,heatersorothersourcesofheat.
• Makesurethattheconnectioncableisnotdamagedorsquashedbeneath
thedevice.Makesurethattheconnectioncabledoesnotcomeintocontact
with sharp edges and/or hot surfaces.
INDUCTION HOTPLATE BASIC 1800
• Model:C18G(CE/EMC)
• Temperaturerange:60-240°C
• Power:1800W
• Connection:230V~50Hz
Withinductionhotplates,anelectricvoltageisappliedonaconductorspoolbe-
neaththeglassceramicsurface.Thiscreatesmagneticelds,whichdirectlyheat
upthebottomofthecookwarethroughaphysicaleffect.Thismeanssavingtime
and energy, because contrary to common hotplates, the cookware is heated up,
not the heating element and the glass ceramic surface.
GENERAL USE
• Plugthepowerplugintoasuitableoutlet.
• ThecontrollampoftheOn/Offswitchlightsupandanacousticsignal
sounds.Nowthedeviceisinstandbymode.
• Placesuitablecookware(stainlesssteel,castironandenamelledat-bottom
pans with a diameter of 12 - 26 cm) in the centre of the hotplate.
• NowpresstheOn/Offswitchtoturnontheinductionhotplate.The“Tem-
perature”indicatorlightblinksandanacousticsignalsounds.
• Nowpressthe“Function”button:
  1x thepresettemperaturestage“120°C”areselectedandthede
   viceisturnedon(Temperaturelevels:60,80,100,120,140,
   160,180,200,220and240°C).
With the selection buttons (+,-) you can change the temperature
   settingfrom60-240°C.
  2x thepresetpowerlevel“5”isselectedandthedeviceisturned
   on(Powerlevels:1,2,3,4,5,6,7,8,9and10).
With the selection buttons (+,-) you can change the power setting
from 1 - 10.
• TimerFunction:
Aftertheselectionoftheoperatingmode(powerlevelortemperaturelevel)
pressthe“Function”buttonuntilthecorrespondingindicatorlightblinks