Installation manual

Table Of Contents

3-3

5975968A RETRO DATA 2100LC 130298

Power Up Considerations

a

PROJECTOR

RIGHTSIDE BRACKET

LOCKING SCREW

LEFTSIDE

PANEL FRONT

FIXING SCREWS



a

 b. Once the front panel has been removed the internal projector

and loud speakers are visible. The right loud speaker is of significance

since, if it is chosen to remove the projector from the front direction,

then this speaker must also be removed first. This is done by removing

all four of its attachment nuts on the top and right pillars of the lower

cabinet structure.

b

PROJECTOR

RIGHT

SPEAKER

RIGHTSIDE

PANEL FIXING

SCREWS



LEFTSIDE

PANEL BACK

FIXING SCREWS

 The rightside panel must next be removed. The rightside panel is

removed by loosening its attaching screws and then pivoting out-

wards the front edge of this panel a little, now pull the front edge out

to release it.

 a. Once the right panel has been removed the projector rightside

bracket locking screw is visible. A mental note of this screws

location should be made as it will be required to be undone in stage

 .

 ,a. The leftside panel is removed by removing all its fixing screws

both on the front and back. Once the screws are removed gently lever

evenly out of its position.