Installation & Assembly

3
Move the door.
1
Rail
Door
2
5
6
Rail
Door
4
BARN DOOR HARDWARE KIT
INSTALLATION GUIDE
Step 11.Install right soft close attachment
X2
Step 12. Stopper Installation
Slide the door closed and to correct position of both
stoppers. Using the provided Allen key, tighten into position
to complete the installation of the Barn Door Kit.
1.Push the door to the right, push it to the required position.
place the actuator connector in the middle of the actuator claw.
2. Insert the washers and tighten it with a wrench.
3. Push the door to the left and install the actuator on the connector.
4. Move the actuator claw to the left, adjust the actuator to a limited position.
adjust the height of the soft close, and make sure it works.
TSQ13BK-6FT+TKM04
Website:www.barnsm.com
Feel Free to Contact Us:[e-mail]