SDS

MSDS- LR6
Issue date: 2019.01.02
NA=Not Applicable Page 3 of 4
Section 7-Handling and Storage
1) Handling
Never swallow. Never charge. Never heat. Never expose to open flame. Never
disassemble. Never reverse the positive and negative terminals when mounting. Never
short-circuit the battery. Never weld the terminal or wire to the body of the battery directly.
Never use different batteries together. Never touch the liquid leaked out of battery. Never
bring fire close to battery liquid. Never keep in touch with battery.
2) Storage
Never store the battery in hot and high humid place.
Section 8-Exposure Controls, Personal Protection
No engineering measure is necessary during normal use. If internal cell materials are
leaked, the information in Section 4 & Section 6 will be useful.
Section 9-Physical/Chemical Characteristics
Nominal Voltage: 1.5V
Section 10-Stability and Reactivity
Stability Stable
Hazardous polymerization Will not occur
Condition to avoid See section 7.
Hazardous Decomposition or Byproducts Hydrogen
Section 11-Toxicological Information
NA
Section 12-Ecological Information
NA
Section 13-Disposal condition
The battery may be regulated by national or local regulation. Please follow the
instructions of proper regulation. As electric capacity is left in a discarded battery and it
comes into contact with other metals, it could lead to distortion, leakage, overheating, or
explosion, so make sure to cover the (+)and (-) terminals with friction tape or some other
insulator before disposal.