SDS

MSDS- LR6
Issue date: 2019.01.02
NA=Not Applicable Page 2 of 4
Copper
7440-50-8
2.4
Steel
7439-89-6
15.7
Ni-plating
7440-02-0
0.3
Nylon-66
32131-17-2
1.6
Fiber
7440-44-0
0.9
Section 4-First Aid Measures
None unless internal materials exposure. If contents are leaked out, observe following
instructions
Inhalation Fumes can cause respiratory irritation. Remove to fresh air and consult a
physician.
Skin Immediately flush skin with plenty of water. If itch or irritation by chemical
burn persists, consult a physician.
Eyes Immediately flush eye with plenty of water for at least 15 minutes. Consult
a physician immediately
Ingestion If swallowing a battery, consult a physician immediately.
If contents come into mouth, immediately rinse by plenty of water and
consult a physician.
Section 5-Fire Fighting Measures
In case of fire, it is permissible to use any class of extinguishing medium on these
batteries or their packing material. Cool exterior of batteries if exposed to fire to prevent
rupture.
Fire fighters should wear self-contained breathing apparatus.
Section 6-Accidental Release Measures
Steps to be taken in case material is released or spilled.
Batteries that are leakage should be handled with rubber gloves.
Avoid direct contact with electrolyte.
Wear protective clothing and a positive pressure Self-Contained Breathing Apparatus
(SCBA).