User manual

V 1.0 30.04.2012 11 / 15 CHROMOFLEX
®
Pro 1 Kanal / 2 Kanal
The minimum voltage for correct operation is 8 Volts; maximum voltage is 26 Volts (+ 5%) for CHROMOFLEX
®
Pro CV and up to 48Volts for CHROMOFLEX
®
Pro CC.
Important: The power supply should have an equivalent pulse load.
Improper power supplies may lead to malfunctions and unwanted flickering effects in the color changes.
Fig. 2
6.1 CHROMOFLEX
®
Pro CV version
„CV“ is an abbreviation for constant voltage.
This model does not have any internal current regulator. Supply voltage is passed through and the voltage of
the power supply must match the voltage of the LED stripe.
Note: LED stripes of 10 Volts, 12 Volts and 24 Volts are offered on the market. Depending on the length the
used LED stripes might need very high currents.
Note: We deliver flexible stripes on reels in length of max. 6 metres, with a power consumption of about 1
Ampere at 24 Volts per color.
„
CHROMOFLEX
®
Pro CV“ 2-channel version is able to control up to 5 Amperes per channel. The 1-channel
version is able to control up to 8 Amperes per channel.
Fig. 3
Fig. 4