Operation Manual

EN
page 35
USER SECTION
8. ENVIRONMENTAL FEATURES
8.1 Packing
The packing consists of the following:
• a wood pallet;
• a nylon bag (LDPE);
• multi-layered cardboard;
• polyurethane foam (PS);
• polypropylene support (PP).
We kindly advise you to dispose of the above-mentioned material in accordance with current
environmental regulations.
8.2 Disposal
The use of the WEEE Symbol indicates that this product may not be treated as householdwaste.
By ensuring this product is disposed of correctly, you will help protect the environment. For more
detailed information about the recycling of this product, please contact your local authority, your
household waste disposal service provider or the shop where you purchased the product.
For the disposal of the machine or one part of its, please follow the directives 2002/95/CE,
2002/96/CE and following changes and/or the legislative decrees of application.
This product or parts of it cannot be disposed of as domestic waste but must be treated by means
of separate collection (see barred waste container symbol on product).
At the time of product disposal, the user must refer to the speci c waste collection systems for
electric and electronic appliances (WEEE).
The manufacturer guarantees the absence of dangerous substances in the EEE’s used in
compliance with the 2002/95/CE Directive.
In the case of failure to comply with that prescribed, the user will be subject to the sanctions
envisioned by the individual European Community member.
Disconnect the machine from the electrical and water supply before disposal.
Cut off the electrical cable in order to make any other use impossible.
All the metal parts are recyclable as they are in stainless steel.
Recyclable plastic parts are marked with the symbol of the plastic material.
9. ECOLOGICAL FEATURES
9.1 Recommendations for optimum energy, water, and additive consumption
Dispensing of salt
A pre-set quantity (by the manufacturer) of salt is injected in the resins every regeneration cycle.
It is important to observe the number of regeneration cycles recommended in paragraph 5.3 in
order to avoid salt spills or lime deposits.
If possible operate the machine at full capacity.
Thus avoiding a waste in detergent, rinse aid, and electrical and water consumption.
Detergents and rinse aids
Out of respect for the environment, use detergents and rinse aids with the highest biodegradability.
Check the correct amount according to the water hardness at least once a year. An excessive
amount of the product will pollute rivers and seas, an inadequate quantity will preclude proper
washing and/or cleanliness of the dishes.
Temperature of the tub and boiler
The temperature of the tub and boiler are set by the manufacturer in such a way as to ensure
the best washing results from the majority of detergents on the market. These may be re-set by
the installer according to your detergent (see chap.1.4).
Removal of food
Carefully scrape food from the dishes using lukewarm water in moderation to help in the removal of
animal fat. To successfully remove caked on material, soaking in hot water is recommended.
Note:
Wash dishes as soon as possible to prevent hardening of the deposits and compromising the
effectiveness of the washing.
For an effective washing process, regular cleaning and maintenance of the dishwasher is
recommended (see chap.6).
Non-compliance with the above recommendations or with any and all information within
the manual could result in a waste of energy, water, and detergent, further causing an
increase in user costs and/or a reduction in performance.