Operation Manual

EN
page 30
Controllo di Qualità - Contròle Qualitè
Qualitatskontrolle - Quality Control
Codice - Code - Kode - Code
DESCRIPTION
Cl/Part
Power supply
Code Factory Settings
Ampere
Watt Max
IMPORTANT For any claim state
reference numbers as printed
above
Matricola - Numero de Serie
Fabriknunner - Serial
Controllo Funzionale - Controle Fonctionnel
Funktiontest - Functional Control
Controllo Dotazione - Controle Accessories
Zubehor Kontrolle - Control of Acessories
Controllo di Qualità - Contròle Qualitè
Qualitatskontrolle - Quality Control
Codice - Code - Kode - Code
DESCRIPTION
Cl/Part
Power supply
Code Factory Settings
Ampere
Watt Max
IMPORTANT For any claim state
reference numbers as printed
above
Matricola - Numero de Serie
Fabriknunner - Serial
Controllo Funzionale - Controle Fonctionnel
Funktiontest - Functional Control
Controllo Dotazione - Controle Accessories
Zubehor Kontrolle - Control of Acessories
2
3
1
Onlyqualiedandauthorizedpersonnelcanmodifyorpersonalizesomeparameters,by
programming the circuit board (see chap. 1.8 Parameters setting).
Attherststartofthemachine,theFACTORYCODEhastobeinserted.
The “A”LEDashesrapidly.
The display shows the word "CODE" for a few seconds.
By using the "K" (decrease) and "L" (increase) keys, insert the factory bar-code of the machine.
ConrmtheselectionbypressingtheStart "H" key.
If the machine is equipped with the optional Water Softner, the "A"LEDashesrapidly.
The display shows the word "hArd" for a few seconds.
The default value of the water hardness ("15 20")isindicatedinFrenchdegrees.
Setthedesiredvalue,byusingthethe"K" (decrease) and "L" (increase) keys (see chap. 1.9.5).
ConrmtheselectionbypressingtheStart "H" key.
Shouldthecircuitboardberesetorincaseofwrongcode,withthemachineinStand-by
mode, keep pressed for some seconds (approx. 9") both the "K" (decrease) and "L" (in-
crease) keys. The circuit board will require the new code number.
ATTENTION! When resetting the circuit board, all “menu 15” parameters will be canceled
as well.
g.4