Operation Manual

page 34

2.6 Regeneration function (optional)

Regenerationiscarriedoutaftertheashingsignaloftheregenerationkeyindicator"F".

IMPORTANT:

Beforestarting a regeneration cycle checkifthereis salt in the specialcontainer(max

0,500kg).

Fillthespecialsaltcontainerwithtankemptyandmachineoff.

When displaying "NO SA"(alternatedtothetankandboilertemperaturesandwithmachi-

neonstand-bymode)addsaltinthecontainerinthewash-tank(onlywithoptionalwater

softener).

Rinsethetankimmediatelyifsaltisspilledinit.

To start the regeneration cycle, switch the machine off with the key "J".

TheredLEDlightsup.

Emptythetank.Removetheoverow.

Formachinesequippedwithdrainpumpseechap.2.5.

Press the "K"button;thedisplaywillshow"rege".

TheregenerationLEDlightsupandthemachinecarriesoutwiththevariousphases.

Thecycleisnishedwhentheindicator"F" goes off, after around 20 minutes.

Note:Regenerationtimeswillbeblockedonlyifthedoorisopened.

The optional regeneration is not allowed in the following conditions:

• duringprogramming.

• duringthewashcycle.

• duringmanualdraining.

• ifthedoorisopen;inthiscasethemessage"DOOR" will be displayed for about 4sec.

• ifthemachineisON.

SALT