Operation Manual

EN
page 35
2.7 Additional Cooling Function (Optional)
This function can only be enabled if the machine is installed with the optional "Additional
Cooling" function.
MachineON.Pressthebutton"K" for at least 3 sec.
Afterthehotrinseiscompleted,anadditionalfresh-waterrinsecanbemade.
During the wash cycle or manual draining the type of rinse selected cannot be changed.
The Additional Cooling selection is displayed with the decimal point of the second
display lighting up.
Note: The Additional Cooling selection is not memorised and must be set every time
the machine is switched off and then on again (if this function is required).