Operation Manual
EN
page 42
7. SIGNALS AND ALARMS
Thealarmsandthesignalsmessagesarevisualized,basedupontheirmeaning.
WhenonthedisplaytheLED"F" above the "K" keyashes,atotalregenerationisneeded
(onlywithoptionalwatersoftener).
Whenashing"NO DE"(alternatedtothetankandboilertemperaturesandwithmachine
onstand-by mode), add detergent inthedetergent tank (only with optional "Sensorfor
ChemicalsLowLevel").
Whenashing"NO RI"(alternatedtothetankandboilertemperaturesandwithmachine
onstand-bymode)addrinse-aidchemicalintherinse-aidtank(onlywithoptional"Sensor
forChemicalsLowLevel").
When displaying "NO SA"(alternatedtothetankandboilertemperaturesandwithmachi-
neonstand-bymode)addsaltinthecontainerinthewash-tank(onlywithoptionalwater
softener).
When displaying "DOOR" means that the open door does not allow the maneuver tried, or
a wash cycle was in progress, when lifting the door.
Table 3
TYPE OF ALARM CAUSE REMEDIES
B1 BOILERFILLINGFAIL
Open the water supply valve and verify a proper water
supplyow.ContactTechnicalService
B2 BOILERPROBEFAIL.
ContactTechnicalService
B3 BOILERHEAT.ALARM
ContactTechnicalService
B4 RINSINGFAILED
TIMEOUTRINSE
ContactTechnicalService
B5 BOILEROVERHEATING
ContactTechnicalService
E1 WATERLOADFAILED
Open the water supply valve.
ContactTechnicalService
E2 TANKPROBEFAIL.
ContactTechnicalService
E3 TANKHEATINGALARM
ContactTechnicalService
E5 TANKOVERHEATING
ContactTechnicalService
E6 TANKDRAININGFAIL.
Checktheoverowpipe.ContactTechnicalService
Z6 TANKLOWLEVEL Drain and load the tank.
ContactTechnicalService
Z9 REGENERATIONFAIL
ContactTechnicalService
Z10 ALARMSL8-BREAKTANKHIGH
LEVEL
ContactTechnicalService