Operation Manual

EN
page 28
ConrmtheselectionbypressingtheStart "H" key.
Theparameterwillstartashing.
Setthedesiredvalue,byusingthethe"K" (decrease) and "L" (increase) keys.
ConrmtheselectionbypressingtheStart "H" key.
This parameter allows the selection of the right water feed hardness to the machine.
It is possible to select one of the following four parameters:
LOW10-15°F(5-8°d)
MEDIUM15-20°F(8-11°d)
MED/HIGH20-25°F(11-14°d)
HIGH25-35°F(14-20°d)
To exit the programming menu press the "J" key.
1.9.6 Set "4" parameter
By the "K" (decrease) and "L" (increase) key, select the "4" STAR BY DOOR parameter.
ConrmtheselectionbypressingtheStart "H" key.
Theparameterwillstartashing.
This parameter allows the automatic start of the wash cycle, by shutting the machine
door.
Setthedesiredvalue,byusingthethe"K" (decrease) and "L" (increase) keys.
It is possible to select one of the two following parameters:
0 - Deactivates the parameter
1-ActivatestheparameterSTARTBYDOOR
Default value "0".
ConrmtheselectionbypressingtheStart "H" key.