Installation Guide

14 Remove the paper backing from the BASCO decal [Y]
and apply to the interior side of the header.
QCI0017 Rev. 2 Page 8 of 8 Certified 09/08/09
SILICONE
SILICONE
13 Neatly silicone each end of the tub track
where it fits into the wall jambs as well as the
seam between the wall and the wall jamb and the
curb and threshold on the inside of the shower.
NOTE: DO NOT USE the shower until the
silicone is completely cured. Check
the tube of silicone for the manufacturer
recommended cure time.
(typically 24 - 48 hours)
NOTE: Silicone on the exterior seam is optional.