Installation Guide
QCI5301 Rev 1 Page 3 Cered 6/5/2017
This unit maybe installed with the inner panel to either side.
In order to minimize chances of water leakage, please install the inner panel closest to the shower
head. Installation with the inner panel opposite of the shower head when closed leaves a gap be-
tween the panels that water may pass through.
MINIMUM THRESHOLD WITDH
This unit requires a minimum 2 7/16” threshold width.
SHOWER HEAD
The unit requires 2 7/16” of threshold width to ensure the unit does not hang off of the edge. It is up
to the installer to determine if the threshold is wide enough to drill into so as to not damage the fin-
ished surface. Please take appropriate precautions to be sure tile surfaces are wide enough so that
they are not broken during the installation process.