User manual
• On industrial sites, the accident prevention regulations of the association of the
industrial workers‘ society for electrical equipment and utilities must be followed!
• If you have any questions that are not answered in this manual, please contact our
technical service or another specialist.
b) Operating Location
• The product may only be used in dry interiors; it must not get damp or wet! Never
set up the product in the direct vicinity of a bathroom, shower, bathtub or similar.
There is a risk of a life-threatening electric shock!
• The product must not be exposed to extremes of temperature, direct sunlight or
strong vibrations.
• Completely unwind the mains cable during use. The power cable must not be
pinched or damaged by contact with sharp edges. Do not place any objects on the
cable, and do not allow it to become kinked. Install the cable where no one can
stumble over it and the plug is easily accessible. Do not install the mains cable
under carpets or the like.
• Do not operate the device in environments where there are high levels of dust,
ammable gases, vapours or solvents. There is a danger of re and explosion!
c) Handling and Use
• Never plug in, unplug or operate the product when your hands are damp or wet.
There is a risk of a life-threatening electric shock!
• Never connect the product to the power supply immediately after it has been
transferred from a cold room into a warm one (e.g., during transport). The
condensation that develops in such cases could damage the device or cause
an electric shock! Allow the product to reach room temperature. Wait until the
condensation has evaporated. This might take several hours. Only after this
should the product be plugged into the power supply and put into use.
• Always pull a mains plug on the gripping surface intended for this purpose. Never
unplug the mains plug from a mains socket by pulling the cable!
• Do not overload the outlet strip. Observe the maximal permissible total power
consumption of all electrical loads connected as per chapter “Technical Data”.
• Do not connect in series! This can lead to an overloading of the power strip! There
is a risk of re!
• Plug the earthed mains plug of the power strip directly, e.g., into a wall socket. Do
not connect other power strips to this power strip.
• Do not operate while covered! At higher connected loads, the power strip and
the connecting cable may become warm, which can lead to overheating and
potentially a re if covered!
• Voltage-free only if the plug is unplugged!
• Do not use the product when it is damaged (e.g., housing or power cable). There
is a risk of a life-threatening electric shock!
In this case, dispose of the product in an environmentally correct manner.
• Safe operation can no longer be assumed if:
- the product shows visible signs of damage
- the product does not work at all or works poorly (leaking smoke or a smell of
burning, audible cracking noises, discolouration to the product or the adjacent
surfaces)
- the product was stored under unfavourable conditions
- it was exposed to heavy loads during transport
• Use the product only in a temperate climate, never in a tropical climate.
• Always pull the mains plug out of the mains socket before cleaning the outlet strip
or when the device will not be in use for a long time.
• Never pour any liquids above or next to the product. You run the risk of causing a
re or a fatal electric shock.
If any liquid has still managed to enter the device, immediately turn off the power
supply to the mains socket at which the outlet strip is connected (turn off the fuse/
circuit breaker/residual current operated circuit breaker of the associated circuits).
Only then can you unplug the mains plug of the outlet strip from the mains socket
and contact a specialist. Do not use the product any longer.
Operating instructions
Socket strip
Item no. 1574789 Item no. 1593791 Item no. 1593798
Item no. 1593785 Item no. 1593792 Item no. 1593799
Item no. 1593786 Item no. 1593793 Item no. 1593800
Item no. 1593787 Item no. 1593794 Item no. 1593801
Item no. 1593788 Item no. 1593795 Item no. 1593802
Item no. 1593789 Item no. 1593796 Item no. 1732743
Item no. 1593790 Item no. 1593797
Intended use
The power strip features several safety outlets to which appropriate consumers can be
connected.
If the socket strip has a switch (see chapter “Technical Data”), you can switch all connected
loads on or off.
The product may only be used in dry, enclosed spaces.
See chapter “Technical Data” for information on connection and the maximal permissible total
power consumption of all electrical loads connected.
For safety and approval reasons, you may not convert and/or alter the product in any way.
If you use the product for other purposes than those described above, the product may be
damaged. Moreover, improper use involves risks such as short-circuits, re, electric shocks,
etc. Please read the operating instructions carefully and do not discard them. If you pass the
product on to a third party, please hand over these operating instructions as well.
This product complies with the applicable national and European Regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package Contents
• Socket strip
• Operating Instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website
Symbol Explanation
The lightning symbol inside of a triangle is used when there is a potential risk of
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating
manual which must be adhered to.
The arrow symbol indicates specic tips and advice on operation.
Observe the operating instructions.
Safety Instructions
Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for any injuries/material
damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper use of the
product. Furthermore, in such cases, the warranty/guarantee will be null and
void.
a) General Information
• The unauthorised conversion and/or modication of the product is not allowed for
safety and approval reasons. Do not open/disassemble! Contains no customer-
serviceable parts.
• Maintenance, adjustment or repair work may only be carried out by an expert/
authorised service centre familiar with the hazards involved and the relevant
regulations.
• The product is designed according to protection class I. It may only be used when
connected to an earthed mains socket.
• The mains outlet used for the connection must be located close to the product
and easily accessible.
• The product is not a toy and should be kept out of the reach of children. Position
the product so it is out of the reach of children.
• Do not leave the packaging material lying around carelessly as it may be a danger
to children.
• Handle the product with care; it can be damaged by impacts, blows or falls even
from a low height.