Instructions

This device is not intended to be used by persons (including children) with
reduced physical, sensory or mental abilities or lack of experience and / or lack of
knowledge unless they are supervised by a person responsible for their safety or
have received instructions on how to use the device.
Children should be supervised to ensure that they do not play with the device.
Always ensure that you do not leave the product unattended during use to protect
children against the hazards of electrical devices. Choose a storage location that
is out of reach of children. Ensure that the cable does not hang down.
Never touch the product with wet or damp hands.
The device was constructed according to protection class II. Only a proper mains
socket (230 V/AC, 50 Hz) of the public supply net must be used as voltage source.
Never pour any liquids over electrical devices or put objects lled with liquid
right next to the device. If liquid or an object enters the interior of the device
nevertheless, rst power down the respective socket (e.g. switch off circuit
breaker) and then pull the mains plug from the mains socket. Do not operate the
product anymore afterwards, but take it to a specialist workshop.
Never use the product immediately after it has been brought from a cold room into
a warm one. The condensation generated could destroy the product. The plug-in
power supply unit also involves danger to life by electric shock! Allow the product
to reach room temperature before connecting it to the power supply and putting it
to use. This may take several hours.
Never submerge the cable, plug or the device in water or other liquids, as this can
result in an electrical shock.
Do not use the fan near an open window to prevent a short circuit due to dripping
rainwater.
The protective fan cage must not be removed before the fan has been
disconnected from the mains. Never use the fan without the protective cage.
Make sure that no objects (such as textiles) can get caught in the rotor blade.
Never leave the product unattended during use.
Only use the device when the protective fan cage is closed and in perfect
condition.
Remove the mains plug from the mains socket after use and before cleaning.
Never cover the product during use.
Risk of injury! Do not insert any objects or ngers into the protective cage when
the fan is on.
Disconnect the fan from the mains before moving it.
The mains outlet must be located near to the device and be easily accessible.
Never pull the mains plug from the socket by pulling at the cable. Always pull it
from the mains socket using the intended grips.
Disconnect the mains plug from the mains socket in thunderstorms for reasons
of safety.
Make sure that the mains cable is not squeezed, bent, damaged by sharp edges
or put under mechanical stress. Avoid excessive thermal stress on the mains
cable from extreme heat or cold. Do not modify the mains cable. Otherwise the
mains cable may be damaged. A damaged mains cable can cause a deadly
electric shock.
Do not touch the mains cable if it is damaged. First, power down the respective
mains socket (e.g. via the respective circuit breaker) and then carefully pull the
mains plug from the mains socket. Never use the product if the mains cable is
damaged.
A damaged mains cable may only be replaced by the manufacturer, a workshop
commissioned by the manufacturer or a similarly qualied person, so as to
prevent any danger.
Never plug in or unplug the mains plug when your hands are wet.
This device is only designed for household use and for the purpose for which it
was manufactured.
The fan must be placed on a at, stable surface.
Never move the fan by pulling on the cable. Ensure that the cable does not
become tangled.
Do not wrap the cable around the device or bend it.
Never use the fan directly next to a heat source.
Consult an expert when in doubt about operation, safety or connection of the
device.
Maintenance, modications and repairs are to be performed exclusively by an
expert or at a qualied shop.
If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operating instructions
Version 01/18
Stand fan 45 W
Item no. 1619407
Intended use
This product is a stand fan designed for indoor use. It comes with an oscillating function. There
are three fan speed settings available. The height of the fan is also adjustable.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, re, electric shock etc.
Read the instructions carefully and keep them. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
Stand fan
Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
This symbol indicates a health hazard, e.g. electric shock.
The exclamation mark indicates specic risks associated with handling, function
and use.
The “arrow” symbol indicates special tips and operating information.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
The device is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, ammable gases, vapours and solvents.
Do not place the product under any mechanical stress.
Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
Before connecting to the mains, make sure that your local AC mains voltage
matches the specications on the nameplate.
If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.