Instructions

This is a publication by Conrad Electronic SE, KlausConradStr. 1, D92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2018 by Conrad Electronic SE. 1644369_70_1646099_V3_0618_02_VTP_m_en
• After switching on, the device will carry out a selftest and will then display the value “0”. The
hanging scale is now ready for use.
Avoid that the load is vibrating, moving or exposed to other forces (6).
If the display (2) after being switched on shows a reading other than “0”, turn the
hanging scale off and then on again.
• Use the UNIT button (3), to change the measuring unit. Every time you press this button, a
different unit will be selected (g> oz> kg> lb).
The selected unit is shown in the display (2) above the measured value.
The last set unit remains selected after switching the device off.
• Hang the object on to the weighing hook (6).
• Once the measured value is stable, it is shown in the display (2).
If the measuring range was exceeded, the display (2) shows “EEEE”. In such a
case, remove the load immediately to prevent damage to the hanging scale.
• The measured value is stored for a few seconds. During this time the display (2) shows “HOLD”.
• Press the “CLEAR” button (4) to reset the memory.
• This function can also be used to prevent that the weight of any containers is not included
when weighing the load (tare function).
- Attach the container rst to the weighing hook (6).
- Once the measuring value is displayed, press the button “TARE” (4).
- The display will reset and you can now weigh the actual load by putting it into the container.
Troubleshooting
The device does not turn on, the no indicators are shown on the display
• Are the batteries empty?
The measured value display is incorrect or does not change when the value to be meas-
ured changes
• Are the batteries empty?
• Is the value to be measured within the measuring range?
• Is the HOLD function activated?
Care and cleaning
Do not use abrasive cleaning agents, cleaning alcohol or other chemical solutions
since these could damage the housing or even impair operation.
• The product is maintenance-free for you, apart from the occasional battery replacement.
Inside the product are no components that need to be maintained by you.
• Use a dry, lint-free cloth for cleaning.
Disposal
a) Product
Electronic devices are recyclable and do not belong in the household waste. Dis-
pose of an unserviceable product in accordance with the relevant statutory regula-
tions.
Remove the batteries that may be inserted and dispose of them separately from the
product.
b) Batteries
As the end user, you are required by law (Battery Ordinance) to return all used batteries/
rechargeable batteries; disposal in household waste is prohibited!
Batteries/rechargeable batteries contain harmful materials and are labelled with
the symbol shown to indicate that disposal in the household waste is forbidden.
The symbols of the critical heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead
(marking can be seen on the battery / rechargeable battery, e.g., underneath the
refuse bin symbol shown on the left).
You can return your used batteries/rechargeable batteries free of charge at the ofcial col-
lection points of your community, in our stores, or at places where batteries or rechargeable
batteries are sold!
That way you full your statutory obligations and contribute to the protection of the environ-
ment.
Technical data
Type HS-11 HS-31 HS-51
Order No. 1644369 1646099 1644370
Operating voltage 3 V/DC
Batteries 2 x 1.5 V Mignon (AA)
Battery lifetime approx. 1/2 year
Automatic cut-off approx. 1 min
Measurement range 15 g  10 kg 15 g  30 kg 15 g  50 kg
Precision 1% ± 1 digit
Measurement unit g, kg, oz, lb
Display resolution 10 g
Dimensions 80 x 90 x 27 mm
Weight 220 g
Measurement and storage
conditions
10 to +60 ºC / 2080% RH