Information
Safety Notes
Read the operating instructions attentively and particularly observe the safety
notes. If the safety notes and the information in these operating instructions
regarding proper handling are not observed, we assume no liability for any
resulting injury/property damage. In such cases, the warranty/guarantee will
also lapse.
a) General
• The unauthorized conversion and/or modication of the product is inadmissible
because of safety and approval reasons. Never dismantle the product!
• Maintenance, adjustment, or repair work must only be carried out by a specialist/a
specialist workshop. The device contains no parts that require servicing or adjus-
ting by you.
• The product is not a toy and must be kept out of reach of children!
The product must only be set up, used or stored in places that are not accessible
to children. The same applies for rechargeable batteries.
Pay particular attention when children are present! Children may change the set-
tings or short-circuit the rechargeable battery/batteries, which may lead to re or
explosion. Danger to life!
• In schools, training centres, hobby and self-help workshops, the use of the product
must be supervised by responsible trained personnel.
• In commercial institutions, the accident prevention regulations of the Employer’s
Liability Insurance Association for Electrical Systems and Operating Materials are
to be observed.
• Do not leave packaging material lying around carelessly. It may become a dan-
gerous toy for children!
• Handle the product with care; impacts, shock or fall even from low heights will
damage it.
• If you are not sure about the correct operation or if questions arise which are
not covered by the operating instructions, please do not hesitate to contact us or
another specialist.
b) Mains cable/mains voltage
• The product is set up in accordance with protection class II (double or increased
output). Observe that the housing or mains line insulation is not damaged or de-
stroyed.
• The mains socket to which the plug-in mains unit is connected must be easily
accessible.
• Do not pull the mains plug from the mains socket by pulling the cable.
• If the mains cable or charger are damaged, do not touch it. Danger to life from
electric shock!
First switch off the mains voltage for the mains socket to which the mains cable
is connected (switch off the corresponding circuit breaker or take out the fuse,
then switch off the fault interrupter protection switch (FI circuit breaker) so that the
mains socket is separated from the mains voltage on all poles).
Only then unplug the mains unit from the mains socket.
If the charger is damaged, stop operating it. Take it to a specialised workshop or
dispose of it in an environmentally friendly way.
If the mains cable is damaged, dispose of the damaged mains cable in an envi-
ronmentally compatible way. Do not use it anymore. Replace it with a new mains
cable of the same specications.
c) Location for Installation
• The charger is intended for dry indoor use only. It must not become damp or wet.
Never set it up near a bathtub, shower or similar!
If the charger is operated via the mains cable, there is danger to life from electric
shock in case of moisture/wetness on the charger/mains cable!
• Avoid direct sun irradiation, strong heat or cold. Keep the charger away from dust
and dirt. The same applies to any rechargeable battery that may be connected.
• Do not operate the charger inside of rooms or in bad ambient conditions where
ammable gases, vapours or explosive dust may be or are present! There is a
danger of explosion!
• Choose a solid, at, clean and sufciently large surface for the charger. Never
place the charger on a ammable surface (e.g. carpet, tablecloth). Always use a
suitable, non-ammable, heatproof surface.
• Keep the charger away from ammable or easily inammable materials (e.g. cur-
tains).
• Never cover the ventilation slits. There is a danger of overheating or re. Never
push any objects into the ventilation slots of the charger; There is a danger to life
from electric shock! Never impair the function of the integrated fan.
• Do not place the charger on any valuable furniture surfaces without using a suita-
ble protection. Otherwise, scratches, pressure points or discolourations are possi-
ble. The same applies to the rechargeable battery.
• Do not use the charger inside a vehicle.
• The charger must only be set up, used or stored in places that are not accessible
to children. Children may change the settings or short-circuit the rechargeable
battery/battery pack, which can lead to an explosion. Danger to life!
Important Informations
Multifunctional charger 80 AC/DC
Item no. 2138452
You can nd the main operating instructions on the CD provided; it is available there
in PDF format. To open the PDF, you need a suitable programme, e.g. “Acrobat
Reader”, which you can download free of charge from www.adobe.com.
Intended Use
The charger is used to charge and discharge rechargeable batteries of the type NiMH/NiCd
(1 - 15 cells), LiPo/LiIon/LiFe/LiHv (1 - 6 cells) and lead batteries (1 - 10 cells, 2 V - 20 V).
The charge current can be set between 0.1 A and 10.0 A (depending on the cell number/
rechargeable battery voltage). The maximum charging power is 80 W.
The discharge current can be set between 0.1 A and 2.0 A (depending on the cell number/
rechargeable battery voltage). The maximum discharging power is 5 W.
The charger is operated by four operating buttons and a two-line lit LC display.
The charger also offers a connection for an external temperature sensor (not enclosed, avail-
able as an accessory) for rechargeable battery monitoring. A balancer is integrated for multi-
ple-cell lithium batteries. For connection of the rechargeable battery, a matching external XH
adapter for rechargeable batteries with 2 - 6 cells is enclosed.
The charger has an integrated mains unit to permit operation on mains voltage
(100 - 240 V/AC, 50/60 Hz). The charger may, however, also be alternatively operated on a
stabilised direct voltage of 11 - 18 V/DC (e.g. via an external vehicle lead battery or a suitable
mains adapter).
The safety notes and all other information in these operating instructions always have to be
observed!
Read the operating instructions carefully and attentively, and keep them for later reference.
Only pass the product on to any third parties together with the operating instructions.
Use other than that described above can lead to damage to the product and may involve ad-
ditional risks such as, for example, short circuits, re, electrical shock etc. The entire product
must not be modied or converted, and the casing must not be opened!
This product complies with the statutory national and European requirements.
Scope of Delivery
• Multifunctional charger
• Mains cable
• XH adapter
• Connection cable with alligator clamps
• Operating instructions (on CD)
Current operating instructions
Download the current operating instructions via the link www.conrad.com/downloads or scan
the QR code displayed. Observe the instructions on the website.
Explanation of Symbols
The symbol with a lightning bolt in a triangle is used where there is a health hazard,
e.g. from electric shock.
The exclamation mark in a triangle indicates important notes in these operating
instructions that must be observed strictly.
The arrow symbol indicates that special advice and notes on operation are provided.
The product is intended for use in dry indoor rooms only; it must not become damp
or wet.
The product is built in protection class II (reinforced or double insulation, protective
insulation).
Observe the operating instructions.