CA Prop 65

29
Date of issue
Version
Product name: BATHWORKS® Bathtub,
Tile & Sink Coating
29 January 2015
Exposure controls/personal protection
8 .
Acceptable Maximum Peak
A
=
ACGIH
=
American Conference of Governmental Industrial Hygienists.
C
=
Ceiling Limit
Potential skin absorption
S
SR
=
Respiratory sensitization
=
Skin sensitization
SS
TD
=
Total dust
Key to abbreviations
Safety glasses with side shields.
Personal protection
Eyes
Consult local authorities for acceptable exposure limits.
:
Engineering measures
:
Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or
other engineering controls to keep worker exposure to airborne contaminants below any
recommended or statutory limits. The engineering controls also need to keep gas,
vapor or dust concentrations below any lower explosive limits. Use explosion-proof
ventilation equipment.
Hygiene measures
:
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Recommended monitoring
procedures
:
If this product contains ingredients with exposure limits, personal, workplace
atmosphere or biological monitoring may be required to determine the effectiveness of
the ventilation or other control measures and/or the necessity to use respiratory
protective equipment. Reference should be made to appropriate monitoring standards.
Reference to national guidance documents for methods for the determination of
hazardous substances will also be required.
Gloves
:
For prolonged or repeated handling, use the following type of gloves:
Recommended: nitrile rubber
=
Threshold Limit Value
TLV
TWA
=
Time Weighted Average
Hands
:
Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary. Considering the parameters specified by the glove manufacturer, check
during use that the gloves are still retaining their protective properties. It should be
noted that the time to breakthrough for any glove material may be different for different
glove manufacturers. In the case of mixtures, consisting of several substances, the
protection time of the gloves cannot be accurately estimated.
Fume
=
F
IPEL
=
Internal Permissible Exposure Limit
R
=
Respirable
xylene
TWA
100 ppm
100 ppm
100 ppm
Not established
STEL
150 ppm
150 ppm
150 ppm
Not established
____________________________
___________
___________
___________
___________
___________
Solvent naphtha (petroleum),
medium aliph.
TWA
400 ppm
Not established
Not established
Not established
____________________________
___________
___________
___________
___________
___________
ethylbenzene
TWA
20 ppm
20 ppm
100 ppm
Not established
STEL
Not established
Not established
125 ppm
Not established
____________________________
___________
___________
___________
___________
___________
1,2,4-trimethylbenzene
TWA
25 ppm
25 ppm
25 ppm
Not established
STEL
Not established
Not established
35 ppm
Not established
____________________________
___________
___________
___________
___________
___________
2-butanone oxime
TWA
Not established
Not established
Not established
3 ppm
STEL
Not established
Not established
Not established
9 ppm
____________________________
___________
___________
___________
___________
___________
Name
Result
ACGIH
Ontario
Mexico
PPG
STEL
=
=
Short term Exposure limit values
Page: 4/8
Canada - Mexico