Instructions / Assembly

Tub, Tile, Wall Surround, & Sink
Refinishing Kit
Treat as if this is a brand new bathtub; remove excess water and wipe
dry after each use.
Always be certain faucets are tightly closed and the shower pipe is
drained after each use.
DO NOT rest any soap bottles, spray cans, or wet clothes on the surface
for extended periods of time.
NEVER use hair dye in a refinished bathtub.
If bathing pets in the bathtub, always place a towel down to prevent
scratches.
Bathmats
If you do not have the non-slip system applied to your surface and you find it
to be to slippery, you may use a NON-SUCTIONED bathmat or a towel
(these must be picked up after each use.) Do not hang the mat or towel over
the bathtub.
Use of a suctioned bathmat or stick-on strips will cause failures of the
resurface coating.
Cleaning
Even though the bathtub does not look dirty, it should be cleaned at least
once a week with a liquid NON-ABRASIVE cleaner
(Scrubbing Bubbles®, 409®, or Fantastic® are recommended products.)
NEVER use bleach or abrasive cleaners (Ajax®, Comet®, or Soft Scrub®)
on a refinished surface. If the non-slip protection system is applied to the
bottom of your bathtub, you may use Soft Scrub® on that area if needed.
Remember
If you treat your new surface with respect, clean it regularly, and keep your
taps dry - your tub will stay beautiful and radiant for years to come! Use
Bathworks® Cleaner and Polishing Kit for the ultimate shine and protection!
BATHTUB CARE TIPS
Congratulations!
Your bathtub or bath fixture has just been resurfaced with
the finest product in the tub and tile coating industry.
Follow these care tips to maintain the beauty of your surface.
www.bath-works.net