Service manual

Maintenance Service and Troub le Shooting

List of Parts

4) Inspection method

To find the sources of noise, press the vibration spot with your hand

while the refrigerator is in operation and listen attentively whether the

vibration becomes weake or vanishes. If the refrigerator has not been

levelly placed ,put a level meter on its top table and adjust the leveling

screws on its legs .In case noise occurs from the compressor ,strike

different locations on the side surface of its case using a rubber hammer or

hand hammer with a wood block in-between so as to determine whether

the suspended springs are out of balance or being seized .

H. Defect Code of Display Panel

Error description

Defect code of Display

panel

(R)refrigerator sensor E1

(F)freezer sensor E2

(M)freezer sensor

M room

R-EVA E4

(D)defrost sensor

F-EVA E5

Defect of communicaition status E6

(RT)ambient temperator sensor E7

(F) High Temperature Alarm of freezer

compartment

Ice machine initialization failure