User manual

11
o After switching on the appliance and closing the warming
drawer, you can tell whether it is switched on and off by looking
at the light on the front of the warming drawer. If the light is lit,
then the warming drawer is on.
Using the warming drawer
Before first use
o Clean the surfaces with a soft damp cloth.
o To remove any residue from the warming drawer that may have
been left from the manufacturing process, you should turn the
control knob to the maximum temperature setting.
o It is perfectly normal for a smell to be produced during this
process.
o You should make sure that any windows in the room are left
open during this process.
o It is advisable for you not to remain in the room whilst the
burning off process is taking place.
o You should leave the warming drawer on the maximum setting
for 2 hours.
Selecting a temperature (PD3SS)
o Place the crockery that you wish to warm in the drawer.
o Use the control knob to the most suitable temperature for the
crockery that you are warming.
o The control knob should only be turned clockwise. Do not
turn it past the MAX position; otherwise damage can be
caused to the thermostat.
o Turning the control knob to the cup symbol, will give you a
temperature of approximately 40°C and should be used to warm
cups or glasses.
o Turning the control knob to the plate symbol, will give you a
temperature of approximately 60°C and should be used to warm
plates and dishes.