User manual

o Turning the control knob to the MAX position, will give you a
temperature of approximately 85°C, this again can be used to
warm plates and dishes. You should ensure that the crockery is
designed to withstand this high a temperature.
o The warming drawer will not start to heat until the drawer is fully
shut.
o IMPORTANT: Care should be taken when removing items
from the warming drawer, when appropriate you should
use oven gloves when removing items from the drawer.
You should make sure that the appliance is switched off
before removing items from the drawer.
Selecting a temperature (PD4SS)
o Place the crockery that you wish to warm
in the drawer.
o The temperature can be set between
30°C and 70°C.
o Press and hold the selector button to turn
the appliance on and then continue to
push this button until the temperature
reaches your desired setting. The lights
to the left of the selector button indicate
the temperature that is set. The lights
will count from 1-6, then to MAX and
then back to 1 again.
o We recommend that you preheat the drawer on maximum for
approximately 10 minutes before selecting one of the higher
temperature settings (4-6). The MAX light will switch on when
the maximum temperature setting has been selected using the
selector button.
o The warming drawer will not start to heat until the drawer is fully
shut. The ON neon will blink until the drawer is fully closed.
o To turn the appliance off again, you should press and hold the
selector button, until the ON neon goes out.
o IMPORTANT: Care should be taken when removing items
from the warming drawer, when appropriate you should
use oven gloves when removing items from the drawer.
12