Specifications

HBZTX6-IN-4 Page 10
5 Description
The ZTX6
The ZTX6 is a modular switching matrix which transmits coaxial-telemetry to the camera
positions. It is controlled by a keyboard. You should read the keyboard installation
instructions for information on how to connect the ZTX6 to the BaxNet network (the network
over which the ZTX6 is controlled). A schematic for a simple installation is shown below.
Telemetry
The ZTX6 telemetry can control pan, tilt, focus, iris, zoom, five latching auxiliaries AUX1
(Camera power), AUX3 (Auto-pan), AUX 4 (activated by the Electronic zoom key), AUX5
(Lamps), AUX6 (Wipe) and one momentary auxiliary AUX2 (Wash). It can also set or call 8
preset positions either automatically (as a result of an alarm) or manually.
Menus
Your ZTX6 has on-screen menus which allow it to be adapted to different installations. They
are accessed using a password (which can be changed) and then they can be used to
change the Unit ID, Camera Sequences, Camera titles, Telemetry Type, Password and
Alarm settings.
Alarm Connections
The ZTX6 has 2 alarm output connections which can have either normally-open or normally-
closed operation. It also has a single alarm input per camera input although, they are not
dedicated to particular cameras. Alarm input connections can be normally-open or normally-
closed and are assigned to programmable alarm responses.