Specifications

HBZTX6-IN-4 Page 17
7.2 Selecting your ZTX6
If you are installing 2 or more ZTX6s on the network then connect them one at a time and
change the Unit ID (see section 9.15 on page 37) so that they do not clash. The current
ZTX6 Unit ID is displayed on power-up.
To select your ZTX6 the first time you power up
• Enter the Unit ID number followed by + .
Your keyboard should now be controlling your ZTX6. To change the keyboard Unit ID refer
to the keyboard instructions.
7.3 Selecting a Monitor
The monitors are numbered as shown in Figure 5.
• Select a monitor by entering the monitor number and pressing
This is now the current monitor and all camera selections apply to it.
Figure 4. Camera and monitor numbering convention
ZTX6 MKII VERSION : 1.xx
BY
BAXALL SECURITY LTD
UNIT ID 9
FIRMWARE VER : wwxxyyzz