Specifications

HBZTX6-IN-4 Page 18
7.4 Selecting a Camera
The cameras are numbered as shown in Figure 5.
• Select a camera by entering the camera number and pressing .
7.5 Starting A Sequence On The Current Monitor
Once the sequences have been set up in the menu system.
• Start the sequence by entering the sequence number and pressing
• Stop a sequence by selecting a camera
7.6 To Operate The Telemetry
Select a monitor and a camera as shown above, ensure that a sequence is not running and
press any telemetry key. If telemetry is available on the current camera then the LED should
light. If it does not you may have telemetry disabled in the Camera/Rx menu (see section
9.3).
The telemetry keys are shown in Figure 4 with a description of their functions.
An additional auxiliary, AUX 4, is available on the ZTX6. AUX 4 is activated using the AUX 4
key
A
.
7.7 To Send A Global Auxiliary Command
• Press and hold the global key and press the desired auxiliary key
The auxiliary command is sent to every receiver output in turn.
7.8 Selecting a Preset
At this stage the presets have not been set, however, ZR-mini receivers are supplied with
random presets to allow checking.
• Select a preset by entering the preset number and pressing
To set a preset see section 9.11.
7.9 To Acknowledge an Alarm
• Select the monitor which is displaying the alarm
• Press the alarm Alarm Acknowledge key .