Specifications

HBZTX6-IN-4 Page 20
Installer setup menu
This menu is only active if you have entered under the installer password. It displays the
software and firm-ware version numbers (also displayed on power-up). It also allows you to
view and set the Unit ID, store and restore user defaults and set the ZTX6 to factory
defaults.
Exit menu
Offers 3 options:
Save and Exit - this saves all your changes and returns to normal operation
Exit without saving - returns to normal operations with original settings
Return to the menus - returns to the menus
Note:
If you choose not to save in the exit menu then the system switches back to the
previous settings.
8.2 Passwords
Each time you enter the menus you require a password. Your ZTX6 has two different
passwords (both of which can be changed) one called the ‘installer password’ which allows
access to installer functions, and a second called the ‘user password’ for end-users.
CAUTION: Your ZTX6 is supplied with the default passwords, we recommend that you
change them immediately to prevent this manual becoming a risk to security.
The passwords can both be changed in the menu system see section 9.1.
The default passwords are as follows:
Initial User password:
, , ,
Initial Installer password: 1, 6, 9, 2