Specifications

HBZTX6-IN-4 Page 25
9.2 Sequences Menu
The sequence menu is different for each of the 8 sequences (sequence number 5 is shown).
To move between sequences either:
• Type a new sequence number in the first field, or,
• Use, page-up, ( and up arrow or Joystick together) or page-down, ( and
down arrow or Joystick together)
The settings shown above would perform the following sequence:
Start then: - Camera 3 for 2 seconds
- Camera 5 for 2 seconds
- Camera 32 for 1 second
- Camera 2 for 2 seconds
- Camera 1 for 5 seconds
- Camera 6 for 2 seconds
- Cameras 7 to 16 for 5 seconds each, then, return to the start
Dwell-time is between 0 and 99 seconds (0 seconds skips the entry).
If you select Clear in the Sequences menu, the following menu is displayed:
If you select Clear Sequence, the sequence is displayed with the settings camera numbers
and dwell times set to zero.
Each sequence can be run on any monitor (except an alarm monitor during an response
condition).
2 Sequences menu
Sequence number : 5
-Element : camera/dwell time -
1:03/02 7:07/ 13:13/
2:05/02 8:08/ 14:14/
3:32/ 9:09/ 15:15/
4:02/ 10:10/ 16:16/
5:01/ 11:11/
6:06/ 12:12/ Clear
Return to main menu
05 05
05 05
01 05 05
02 05 05
05 05
02 05
2.2 Clear Sequence
Clear Sequence
Return to sequence menu