Specifications

HBZTX6-IN-4 Page 33
9.11 System Settings Menu: Setting Presets
Presets are preset camera positions. A typical receiver has 8 of these. Some receivers do
not have any, check your receiver before beginning.
You can program presets with a different transmitter and call them from the ZTX6 because
they are stored in the receiver. Because of this, if you are using the ZTX6 as a replacement
transmitter then you do not always need to change the presets.
This section describes Enhanced mode preset setting. The type of preset setting
(STANDARD/ENHANCED) is set for each camera under the Camera/Rx menu, see section
9.3. The default is ENHANCED.
Note: Baxall receivers manufactured before March 1996 are not compatible with Enhanced
mode preset programming. If you have an earlier version then try Standard mode preset
programming as described in Appendix A or contact your Agent.
To enable ‘preset setting mode’:
• Change the ‘Program preset’ menu item to be YES in the System data menu
(below)
To set a preset in Enhanced mode:
• Select the camera
• Press the telemetry key
• Adjust Pan, Tilt, Focus and Zoom
• Press
F
, the preset number (1 to 8), then the preset key .
The preset is now stored.
Note:
To prevent presets being set by operators, return to this menu and set ‘Program
preset’ to NO.
5 System settings menu
Program preset : YES
Set title positions
Time and date settings
Return to main menu