Specifications

HBZTX6-IN-4 Page 39
10 Trouble-Shooting
I get interference on my picture/recording when I operate the telemetry.
If the interference appears when you attempt to move a camera (send telemetry). Then you
may want to use ALTERNATE instead of STANDARD telemetry. STANDARD telemetry can
interfere with the on-screen displays on some equipment.
Telemetry is available in two types which can be changed on individual inputs. STANDARD
which operates on all Baxall receivers and ALTERNATE which only operates on ZR-mini
receivers.
Changing the telemetry type is described in section 9.3.
What happens to my settings when I attach a ZTX6/MOD?
The settings for your ZTX6 are stored in the base module so that attaching the extra
ZTX6/MOD (up to a maximum of 3) does not affect any of the previously saved settings. The
extra 8 camera inputs, alarm inputs and the extra 2 monitors will need setting up in the
menus.
I need to contact my agent for technical support
Always have the versions numbers and purchase dates of all your units to hand when you
phone technical support. It can save time.
The Keyboard version number is displayed on the LCD at power-up.
The ZTX6 version numbers are displayed either in the Installer menu or on the power-up
screen.
The numbers ‘1.xx’ and ‘wwyyxxzz’ indicate the ZTX6 software and firmware versions,
(different from the ZKB1).
8 Installer Setup menu
Software Version :1234
Firmware Version :56789ABC
Unit ID : 09
Save to user defaults
Restore user defaults
Restore factory defaults
Receiver tuning mode
Zoom swap :NO
Return to main menu
ZTX6 MKII VERSION : 1.xx
BY
BAXALL SECURITY LTD
UNIT ID 9
FIRMWARE VER : wwxxyyzz